2024 Timberwolf TWC-24 Paddle Belt Conveyor

Standard Specs:
Engine Power: 4.9HP
Travel Height: 8'
Min Height: 7'8"
Max Height: 13'2"
Max Angle: 29
Frame Width: 1'10"
Weight: 1,730lbs


Standard Features:
>Tapered rollers that self-adjust for correct belt tracking
>Ground skid that provides additional stability by anchoring to solid ground
>Rubber belt fines deflector that prevents debris from falling into the roller
>Hydraulic lift cylinder controlled by a tandem center spool valve

Timberwolf's second largest firewood conveyor, the TWC-24, can operate as high as 13’2” in the air and as low as 7’8”, with a 24’ long frame and a width of 1’10”.

This 1,730-pound firewood conveyor provides maximum stability - the end all be all for conveyors - with the use of a ground skid. The ground skid maintains contact with solid ground, which keeps the firewood conveyor sturdy while handling large loads. It also lifts the roller off the ground, which provides more room for debris to fall.

The rubber belt fines deflector prevents debris from falling into the roller. These features result in a cleaner pile of firewood at the end of the conveyor system and a longer product lifespan.

Adjusting the height of the firewood conveyor is simple with our hydraulic lift cylinder. Coupled with a tandem center spool valve, the hydraulic lift cylinder is controlled by the operator and can be adjusted numerous times to fit the needs of any project.

Because of the log conveyor’s size, it uses telescopic axle arms, which are two arms on either side of the hydraulic lift cylinder. The telescopic axle arms provide a sturdy firewood conveyor base, dramatically reducing the risk of the conveyor tipping. Also, the telescopic axles can adjust height along with the hydraulic lift cylinder; simply remove the pull pins securing the telescopic axle arms to adjust the height and re-insert them once the conveyor is at your desired height.

Loading logs with the TWC-24 is as easy as adjusting the firewood machine's height. Because of the modular hopper’s funnel-like design, it can be filled directly with loader buckets. Constructed out of 3/16” plate steel on the bottom and 1/8” plate steel on the sides, the hopper is not only sturdy but also bolt-on, making removal and upgrades easy.

Belt tracking is a constant issue with many conveyors on the market, causing breaks in production we aim to avoid with the TWC-24. Because of the wood conveyor’s tapered rollers design, the belt will pull itself back towards the center if misaligned, even if the conveyor is on uneven ground.

• 
• 
• 
• 
• 
• 
• 
• 

Get an Estimate for Your Payment

• Payment Frequency: Bi-Weekly Monthly
• Vehicle Price
• Down Payment
• Interest Rate
• Loan Term In Years 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
• Calculate  Reset
• Estimated Payment

• Calculation is estimate only.